Trioptics - un univers de précision

Recherchez directement un
produit ou une documentation :


ex : banc de mesure FTM, Trioptics GmbH

ORA SFO
AFOP Cluster Lumière

Produits > Test et analyse par la lumière > Electronique pour détecteurs > Pré-Amplificateur 474

Pré-Amplificateur 474 Pré-Amplificateur 474

The characterisation of spectral response1 and EQE/IQE of photovoltaic devices involves the determination of device response to a monochromatic light probe in the presence of a solar simulator bias to simulate operation conditions.

In order to discriminate between the photocurrents generated by both optical stimulations, the monochromatic probe is optically chopped (AC), whilst the solar simulator is operated in the DC regime.

The 474 transformer blocks the DC component and amplifies and passes the AC component to the system lock-in amplifier.

The 474 transformer is positioned close to the device under test and coupled via low-resistance cable to ensure short circuit conditions, whilst the 474 amplifier is a single-width module housed within the 417/T mother unit.


Core Features

Near-short circuit device operation
Decouples DC bias source generated photocurrent
Signal gain provided by transformer and low-noise amplifier

1IEC60904-8, Photovoltaic devices – Part 8: Measurement of spectral response of a photovoltaic (PV) device

 

SPECIFICATION
Transformer DC resistance 0.05Ω
Transformer Gain ~100
Amplifier Voltage Gain 500
Amplifier bandwidth 5Hz to >100kHz
Amplifier short circuit input noise  <1nV Hz -1/2 at 1kHz
Amplifier Maximum Output 10V
Frequency of Operation 600Hz typical

 

Pré-Amplificateur 474
Documentations à télécharger :
474.pdf Télécharger
Contactez-nous