Trioptics - un univers de précision

Recherchez directement un
produit ou une documentation :


ex : banc de mesure FTM, Trioptics GmbH

ORA SFO
AFOP Cluster Lumière

Produits > Test et analyse par la lumière > Etalons > Photodiode silicone de référence Si-CAL

Photodiode silicone de référence Si-CAL Photodiode silicone de référence Si-CAL

 

The Si-CAL is a general purpose UV-enhanced silicon photodiode offering excellent linearity and low noise, calibrated in spectral response (A.W-1) over the wavelength range of 300-1100nm. Calibration is performed with respect to a detector of the same type calibrated by Physikalisch-Technische Bundesanstalt (PTB).

Its' mount is compatible with the entire range of Bentham monochromators and accessories.

This detector is recommended for use with the 400 Series of detection electronics.

 

Specification

PHOTODIODE
Active area 10 x 10mm
Max. Operating Temperature -40 to +70°C
Temperature dependence of responsivity up to 1%/ °C at band edge
Window material Quartz
TYPICAL VALUES
Peak Wavelength 960nm
Peak Responsivity 0.52 A.W-1
Dark Current <1pA
Max Shunt Resistance 0.2GΩ
NEP 1.8 x 10-14 W/Hz1/2
CALIBRATION
Measurement Type Spectral responsivity under short-circuit conditions
Wavelength Range 300-1100nm, 5nm intervals
Calibration Frequency 3-yearly recommended
Temperature at Calibration 20°C

Options

Calibration Ranges UV extension 200-300nm

Spectrum

Si-CAL spectra

 

Photodiode silicone de référence Si-CAL
Contactez-nous