Call
Request a call

Error: Contact form not found.

Contact
Contact

The WaveMaster PRO 2 wavefront analyzer is used for mass production analysis of small plastic or glass lenses.

Due to the constant increase in quality requirements, the use of wavefront measurement becomes necessary to improve production quality.

The WaveMaster PRO & PRO 2 Wafer wavefront analyzers are capable of analyzing entire lens wafers with a measurement time of 2 seconds per lens. The wafer change is very quick to allow a full analysis of mass production.

Regarding measurement technology, the WaveMaster PRO 2 and PRO 2 Wafer wavefront analyzers determine the wavefront using a Shack-Hartmann sensor, from which various parameters are derived. A comparison with the design data is then performed.

Features of the WaveMaster PRO wavefront analyzers: 

WaveMaster PRO 2 Measurement on a tray
WaveMaster PRO 2 Wafer Measurement of an optical wafer
Measurement setup for spherical or aspherical optics Transmission measurement with a point source
Measurement setup for planar optics Transmission measurement with a collimated beam
Sample aperture 0.5 mm … 14 mm (depends on image size)
Sample focal length -12 to +50 mm
Measurement time per optic
Throughput per hour ≥ 1800
Number of lenses per tray Max. 148
Tray change time 10 s
Wafer change + alignment time < 2 min
Setup time for a new design < 5 min
Wavelength 532 nm, 635 nm (other on request)
Wavefront measurement accuracy < λ/20 (RMS)
Repeatability < λ/200 (RMS)
Dynamic range > 2000 λ
Measurement frequency Up to 12 Hz
Lateral resolution 138 x 138