Kinematic mirror mounts

K 25 kinematic mirror holder

K 25 small kinematic mirror holders are designed for mirrors up to ø 25 mm / 25.4 mm (1″) in diameter or, in the case of beam deflection, rectangular mirrors 20 x 30 mm.

Two fine-threaded screws or micrometers with a 0.25 mm pitch enable precise adjustment.

For maximum flexibility, the mirrors of the K 25 kinematic support are glued to a glass substrate. This is wedged into the support plate, enabling rapid mirror replacement.

• For use with SYS 40 (with FP-K25-LL base plate)
• Deformation-resistant aluminum
• Low reflection, black anodized
• Lockable to secure adjustment

Installation options :

• With M4 threaded hole
• Directly on the pin or via a base plate, in which case the slot can be used to bring in the reflective surface
• On the pin axis
• Mounting with FP-K25-LL base plate on RT 40 rail

Option

• Non-magnetic or vacuum-prepared versions available

K 50 kinematic mirror holder

K 50 kinematic mirror holders are suitable for front-surface mirrors in the size range 25 mm / 25.4 mm (1 “ ) to 50 mm / 50.8 mm (2 ”).

With the FP-K50-LL slotted base plate, mirror brackets are intended for use with SYS 40 without rail-slide combination.

Kinematic mirror holders are available for rectangular and round mirrors

K 80 kinematic mirror holder

K 80 kinematic mirror holders are highly stable and offer excellent adjustment sensitivity. Depending on your requirements, adjustment can be made with fine threaded screws or micrometers.

K 50 mirror holders are also available for small mirrors.

Kinematic mirror holders can be supplied with fine thread screws or micrometers.

Motorized mirror holders can be supplied on request.

• For use with SYS 90
• Deformation-resistant aluminum
• Low reflection, black anodized

Installation options :

• With central M8 threaded hole, two M4 or M6 tapped holes
• In SYS 90 using base plate FP 70x70x15 on slide RT 90-60-R.
• Setting the slotted hole for centering
• Mirror surface

Option

• Vacuum versions available
• Kinematic mirror holders can be supplied with fine thread screws or micrometers.
• For use with SYS 40 and SYS 65
• Deformation-resistant aluminum
• Low reflection, black anodized

Installation options :

• With one M6 or two M4 threaded holes
• Directly on the spindle or via a base plate, in which case the slot can be used to bring in the reflective surface
• On the pin axis
• With two M4 screws on an RT 65 slide or on the M6 central thread on an oblong-hole slide
• RT 65-40-R-LL

Option

• Non-magnetic or vacuum-prepared versions available.