The MIPOS lens positioning systems have been developed for fine adjustment of micro-lenses and lenses. The maximum displacement is 600μm for the larger version. The resolutions of the MIPOS are very high and, in practice, only limited by the voltage noise of the supply.
A special integrated preload design offers the following advantages:
– Very small angular deviation
– Wide range of parallel motion
– High resonance frequency
All standard threads for Zeiss, Leica, Nikon, Olympus etc. are available for the upper and lower sides of the MIPOS
Mounting this system on the microscope is very simple: screw the Flex-Adapter thread ring into the microscope and mount the lens positioning system on this ring with a screw. Due to the small size, no other threads next to MIPOS are blocked.
A special version allows reverse working (UD) on inverted microscopes. These MIPOS systems are referred to as “UD”.
To prevent drift and hysteresis, MIPOS is also available with an integrated strain gauge (“SG”) measurement system.
Data sheets to download
Related products
-
Mipos 20
The MIPOS series piezoelectric lens positioning system has been developed for precise adjustment of microscope lenses and lenses. The maximum movement is 20 μm. The resolution […]
-
Nano Mipos 400
The nanoMIPOS 400 CAP has been developed to fine-tune micro-lenses. Maximum movement is 400μm. The resolution of the system is in the nm range. The special […]
-
Mipos R120
The MIPOS R 120 is used for precise focusing and positioning of microscope objectives. The MIPOS R 120 has been specially developed for positioning a microscope […]
