Table anti vibration Séries Work Station

Anti vibration table for optical application Series Work Station

Ergonomic design and stability.

The performance of each vibration isolation system is affected by the basic conditions in the laboratory.

Under the most favourable conditions, the vibration isolation system is located directly on the ground. As this is not feasible in most cases, tables or supports are required, which in turn must meet high requirements.

The ergonomically designed workstation series perfectly combines an active vibration isolation system with a welded steel support frame.

The result is an ergonomic workstation with excellent vibration isolation performance and suitable for many laboratory applications.

There are two types of work stations.

    One with a smaller insulated surface for light applications i.e. the Workstation_i4

    And a second with a large isolated surface, the Workstation_Vario.

Workstation series applications include: scanning probe microscopy, inverted optical microscopy with or without MPS combination, confocal microscopy, profilometry, nanoindentation, patch-clamp configurations, laser configurations, etc.

Active anti vibration system Workstation_i4

The Workstation_i4 anti-vibration system offers a compact, isolated active surface, specially designed for microscopes, surrounded by an uninsulated conventional laboratory desk surface.

This surface can be used to place additional material, handle test samples or simply take notes.

The Workstation_i4 anti vibration module is designed to be used with optical microscopes or microscope/SPM combinations.

Active Vibration Module Workstation_Vario

The anti vibration Workstation_Vario systems are supplied with

Active anti vibration system Workstation_i4

The Workstation_i4 anti-vibration system offers a compact, isolated active surface, specially designed for microscopes, surrounded by an uninsulated conventional laboratory desk surface.

This surface can be used to place additional material, handle test samples or simply take notes.

The Workstation_i4 anti vibration module is designed to be used with optical microscopes or microscope/SPM combinations.

Active Vibration Module Workstation_Vario

The anti vibration systems Workstation_Vario are supplied with an integrated optical breadboard with steel frame as a working surface. The enclosed frame can be used for installation of acoustic speakers, for example. Such workstations are capable of supporting larger and heavier applications